MK 2250

Remote Controlled Stereophonic 2 x 50 W Integrated Amplifier, designed in solid-state technology class AB. SHC (System Harmonic Control) circuitry.

Amplifier designed in solid-state technology class AB MK 2250

MK 2250 power structure is been realized with the aid of a toroidal transformer power supply from well 320 VA and a filtering system total of 100,000 UF well, to ensure that even the most challenging demands can be met. This includes the use of two selected pairs of MOSFET from about 20 Ah per channel.

This configuration is obtained by utilizing a low value of output resistance and a high availability of current, providing remarkable control in the way the articulation and the relative content of information within the same spectrum.

The sound is very similar to that of amplifiers with vacuum tube technology, obtaining great consistency across the entire sound spectrum and high lighting the significant potential for analysis of micro-and-macro- detail of the musical content.
Innovative new drivers in pure class”A” gives a great increased quality, control and harmonic richness.

The final stage is characterized by a substantial increasing trend in terms of current demand transient dynamic, in fact, it’s capable of almost doubling its power to halving the resistive value of the load applied without any limitation in current.



Other Benefits

The stadium management inputs is divided in five sections RCA line, allowing the end user to use multiple devices in connection and handle differently, MK-2250 has a switch back with the task of feeding the whole machine and ensure the proper operating temperature, before activating the front button, the timing of the output muting and you can listen to the same amplifier.

The last point concerns the placement in the same environment. It is important to ensure good ventilation on the whole surface of the amplifier, because the internal temperature on same heat sinks as part of the power stage has an optimal operating temperature of 60° C.
If the temperature were to exceed this, the thermal protection would come into operation, unhooking the entire power system for the purpose of protecting the amplifier and any speakers that might be connected to it.

In conclusion, the significance of the interconnectivity of the individual assets must not be overlooked. The wiring is made from silver-plated copper provided by Wireworld – a master in the world of hi-end electrical connections. This is a magnificent system for ensuring quality connections for both signals and power.
The contacts that bind this system are treated with Rhodium to ensure the preservation of synergy and quality musical content.

Leave your contact for information about events, products, and discounts.

Please enter your details and we will contact you as soon as possible.

    I read and accept the terms of theprivacy policy

    Technical Specifications


    Rms Power On:
    8 Ohm 2x 50 W / 4 Ohm 2x 80 W / 2 Ohm 2x 100 W (current limited)
    Frequency Response:
    da 10Hz a 60 Khz +- 0,5db
    Peak output current:
    30 Ah
    Harmonic Distortion at max power:
    THD 1,6 %
    Signal to noise ratio S/N :
    Sensitivity for max. Power:
    310mV 50KOhm RCA
    Sensitivity for max. Power:
    400 mV 50 KOhm XLR
    Dimensioni (WxDxH) mm.:
    18 Kg


    Do you have any questions about this product? Use the contact form below to communicate with our support team.

      I read and accept the terms of theprivacy policy